LOXrail® 25 wheel sets

  • All LOXrail® wheel sets are made of rollers or wheels embedded in a precisely manufactured aluminum case
  • Damping plates at the top of the wheel sets allow a high smoothness and soften peak loads during loading of the carriers
  • Mounted brush wipers for cleaning of the rails are integrated in the aluminum case and protected against damage
  • Metal scrapers are available for all wheel sets to clean the rails from heavier dirt
  • Rollers and bearings are lifetime lubricated and nearly maintenance free

LOXrail® single idle wheel set 25-1

Art. No. 481200Drawing No.: 16002-0136

Technical documentation

Single-Wheelset for LOXrail® 25

  • Compact design for applications with lighter loads and without rail crossings

Max. Payload:

  • 16.4kN on LOXrail®
  • 7.05 kN in case of load on wheel flange
Technical documentation

LOXrail® double idle wheel set 25-2

Art. No. 481201Drawing No.: 16002-0130

Technical documentation

Double-Wheelset for LOXrail® 25

  • Type with two rollers for medium and higher loads and for applications with rail crossings

Max. Payload:

  • 32.8 kN on LOXrail®
  • 14 kN in case of load on wheel flange
Technical documentation

LOXrail® wheel set 25-1 MR

Art. No. 481204Drawing No.: 16002-0460

Technical documentation

Single-Wheelset for LOXrail® 25 with additional mounting frame

  • Easy mounting to existing steel work structures
  • Appropriate installation of Wheelset to mounting frame
  • Easy adjustment to fixed or loose bearing

Max. Payload:

  • 16.4kN on LOXrail®
  • 7.05 kN in case of load on wheel flange
Technical documentation

LOXrail® wheel set 25-2 MR

Art. No. 481205Drawing No.: 16002-0480

Technical documentation

Double-Wheelset for LOXrail® 25 with additional mounting frame

  • Easy mounting to existing steel work structures
  • Appropriate installation of Wheelset to mounting frame
  • Easy adjustment to fixed or loose bearing

Max. Payload:

  • 32.8 kN on LOXrail®
  • 14 kN in case of load on wheel flange
Technical documentation

LOXrail® drive wheel set 25-1 AT

Art. No. 481208Drawing No.: 16002-0455

Technical documentation

Single-Wheelset with drive wheel for motorized applications

  • For use in application with lighter loads
  • Drive wheel diameter 160mm
  • Special adapters are available for connection to cardan or drive shafts

Max. Payload:

  • 25 kN on LOXrail®
  • 25 kN in case of load on wheel flange
Technical documentation

LOXrail® drive wheel set 25-2 AT

Art. No. 481209Drawing No.: 16002-0450

Technical documentation

Double-Wheelset with drive wheels for motorized applications

  • For use in application with medium loads
  • 2x drive wheel diameter 160mm
  • Special adapters are available for connection to cardan or drive shafts

Max. Payload:

  • 50 kN on LOXrail®
  • 50 kN in case of load on wheel flange
Technical documentation

LOXrail® wheel set 25-2 AT pendulum

Art. No. 481270Drawing No.: 80000-0190

Technical documentation

Double-Wheelset with drive wheels for motorized applications with pendulum suspension

  • Ensures a symmetrical load sharing between both wheels
  • Easy and quick change of wheel set
  • For use in application with medium loads
  • 2x drive wheel diameter 160mm
  • Special adapters are available for connection to cardan or drive shafts

Max. Payload:

  • 50 kN on LOXrail®
  • 50 kN in case of load on wheel flange
Technical documentation

LOXrail® Adapter flange set

Art. No. 481301Drawing No.: 16002-0449

Technical documentation

LOXrail® Adapter flange set for drive wheels

  • For connection of cardan shaft to drive wheels
  • Including screw and washer for assembly to drive wheel
Technical documentation

LOXrail® clamping bush d30

Art. No. 481302Drawing No.: 16002-0459

Technical documentation

Clamping bush for LOXrail® drive wheels

  • For connection of drive shafts to wheels by clamping
  • Designed for drive shafts diameter 30mm
  • Including mounting material
Technical documentation

LOXrail® clamping bush d35

Art. No. 481303Drawing No.: 16002-0439

Technical documentation

Clamping bush for LOXrail® drive wheels

  • For connection of drive shafts to wheels by clamping
  • Designed for drive shafts diameter 35mm
  • Including mounting material
Technical documentation