LOXrail® 25 floor rail system

  • The patented, single clamped LOXrail® floor rail system is designed for the movement of low and medium loads
  • The three-part rail system consists of an aluminum base profile, one aluminum clamping profile, a hardened and polished highly resilient tool steel, 25 mm diameter round-bar
  • By clamping the steel bar only on one side the number of single parts is reduced and installation times are shortened significantly
  • During the installation the round-bar is held in the aluminum base profile by preload and is finally fixed by the clamping profile after assembly

LOXrail® 25 floor rail

Art. No. 480200Drawing No.: 80000-0037

Technical documentation

  • Aluminum base profile
  • Aluminum clamping profile
  • Hardened and polished guide rail (optional stainless steel)
  • Max. length of single profiles: 3000mm
  • Length will be cut individually to your application
Technical documentation

LOXrail® 25 fixing clamp

Art. No. 480202Drawing No.: 80000-0016

Technical documentation

  • Fixing clamp for LOXrail® 25/40 for fixing the floor rail on steel beams or flat steel
  • Adjustment option for precise setting of track centers
  • Fixing clamps will be set every 300mm on both sides of the rail
  • We also provide ready-to-use support profiles for floor mounted installation including suitable a hole pattern
Technical documentation

LOXrail® 25 end stop

Art. No. 480204Drawing No.: 80000-0520

Technical documentation

  • End piece for LOXrail® floor rail
  • Hinders the carrier from inadvertent leaving of the track
  • Designed for recessed floor installation
Technical documentation

LOXrail® 25 end stop floor mounted

Art. No. 480218Drawing No.: 80000-0585

Technical documentation

  • End piece for LOXrail® floor rail
  • Hinders the carrier from inadvertent leaving of the track
  • Designed for floor mounted installation
Technical documentation

LOXrail® 25 fixed hard stop

Art. No. 484111Drawing No.: 17040-0280

Technical documentation

  • Hard stop to avoid that carriers leave the rails
  • Rubber shock absorber
  • Could also be used as a support for positioning at the end of the track
  • Mounted to the rail and additionally fixed in the floor with an anchor bolt
    (anchor bolt is not part of delivery)
Technical documentation

LOXrail® 25 crossing element

Art. No. 480210Drawing No.: 16002-0116

Technical documentation

  • Hardened connection element for cross-over areas incl. cover clips.

Incl. mounting plate to clamp the rail during installation

Technical documentation

LOXrail® installation jig 25-2

Art. No. 480298Drawing No.: 16002-0471

Technical documentation

  • Installation jig for precise in floor installation of LOXrail® with exact track center width
  • Precise adjustment of rails in height before grouting
  • The installation jig is set  every 1.2m along the tracks
  • Precisely manufactured according to the individual track center width
Technical documentation

LOXrail® 25 installation jig 25-1

Art. No. 480294Drawing No.: 16002-0491

Technical documentation

  • Installation jig for precise in floor installation of LOXrail® with single rail lanes
  • Precise adjustment of rails in height before grouting
  • The installation jig is set every 1.2m along the tracks
Technical documentation

LOXrail® grounding adapter

Art. No. 480203Drawing No.: 16002-0750

Technical documentation

  • Connector between LOXrail and grounding system of building
Technical documentation